
MF/UF Flat Sheet Membrane Test System
The MF/UF Flat Sheet Membrane Test System, developed by MEMS, is designed for cross-flow filtration testing of microfiltration (MF) and ultrafiltration (UF) membranes. It provides precise pressure and flow control, allowing researchers to evaluate membrane performance, permeability, and fouling resistance. With temperature-controlled feed tanks, high-pressure pumps, and real-time monitoring sensors, this system is ideal for membrane research, material development, and process optimization.
Basic Specifications:

-
Feed Tank Capacity: 50L
-
External Heat Exchanger Temperature Control: 5 ~ 25℃
-
Feed Pump Max. Flow Rate: 4.5 L/min
-
MF Membrane Cell: 25 mm (D), Max. Pressure: 10 bar
-
UF Membrane Cell: 60 mm (D), Max. Pressure: 10 bar
-
Control Panel: HMI Control Panel
-
Dimensions: 1,500mmL x 800mm W x 1,200mmH
Spiral-Wound 4040 & 8040 RO Test System
Spiral-Wound 4040 and 8040 RO Test System, developed by MEMS, is designed for performance testing and evaluation of reverse osmosis (RO) membranes under controlled conditions. Ideal for research institutes, pilot-scale process development, and membrane manufacturers, this system enables users to analyze membrane rejection rates, flow rates, and fouling behavior. It supports standard 4" x 40" and 8" x 40" spiral-wound membranes, making it a practical solution for realistic filtration simulations and membrane optimization studies.
Basic Specifications:

-
Module Size: 4040, 8040
-
Feed Water Type: BWRO, SWRO
-
Instrumentation & Monitoring: Pressure Gauges, Flow Meter, Conductivity Sensor
Permeation Cell (Disk Type / Rectangular Type)
The Flat Sheet Membrane Permeation Cell, available in both disk-type and rectangular-type configurations, is designed for precise evaluation of membrane permeability, selectivity, and separation performance under various conditions. It is commonly used in laboratory-scale testing of flat sheet membranes for processes such as filtration, separation, concentration, and purification. This cell is ideal for membrane researchers, quality control teams, and developers conducting early-stage material screening or comparative membrane analysis.
Basic Specifications:

-
Membrane Type: Flat sheet (disk or rectangular shape)
-
Operating Pressure:
-
Disk Type: Max. 50 kg/cm2
-
Rectangular Type: Max. 69 kg/cm2
-
-
Membrane Size:
-
Disk Type Membrane Size: 48 mm diameter
-
Rectangular Type Membrane Size: 165 mm x 122 mm
-